发布时间：2025-08-16
1、 Precautions before cardboard box production: 1. Operators must wear work clothes with waistbands, sleeves, and safety shoes when going to work, as loose clothing such as coats can easily get caught in the exposed shaft of the machine and cause accidental injuries. 2. Before starting up all machines, it is necessary to check for oil and electricity leakage to eliminate safety hazards. 3. It is prohibited to place any items on the top of the machine to prevent them from falling into the machine and causing damage to the machine and personal injury. 4. Tools such as tuning wrenches must be stored in the toolbox after use to prevent them from falling into the machine and damaging it. 5. It is prohibited to place beverages, water, oil and other liquids on the electrical cabinet and any live equipment to prevent leakage and potential safety hazards caused by electrical short circuits. 2、 Precautions in cardboard box production: When installing, debugging, and cleaning the printing plate, the main machine should not be started, and a foot operated phase switch should be used to slowly operate the printing roller. 7. All rotating parts of the machine and belts must not be touched by hand during operation to prevent harm to the body. They must be stopped before handling. Before closing the printing machine, it is necessary to check that there is no one inside the machine before closing it. When abnormal situations occur during homework, it is necessary to promptly pull the safety ropes or emergency stop switches in each unit to avoid danger. 10. The exposed transmission gears of the machine need to be treated to avoid safety accidents. 11. When installing slotting knives and die-cutting molds, attention should be paid not to touch the cutting edge with hands to avoid being cut by the cutting tools. During the operation of the equipment, the operator should maintain a certain distance from the machine to prevent being brought in by the machine and causing injury. 13. During the operation of the paper stacking machine, it is strictly prohibited for any personnel to enter, in order to prevent the machine from suddenly falling and injuring people. When wiping the printing plate, the printing machine must maintain a certain distance between the hand and the mesh roller to prevent injury caused by the introduction. 15. If the paper feeding is tilted during the production process, the machine should be stopped for processing. Do not forcefully grab the paper with your hands to prevent pulling them into the machine. 16. When manually nailing needles, be careful not to place your hands under the nail head to avoid injuring your fingers. 17. When the baler is running, the head and hands should not be inserted into the baler to prevent injury caused by rotation. Any abnormal situations must be powered off before handling. 18. When adjusting the manual die-cutting machine, the machine power must be turned off to prevent personnel injury caused by the machine closing. 3、 Precautions for cardboard box production: 19. After production, the products must be stacked neatly without tilting or falling off. 20. It is prohibited to stack products over a height of 2 meters to prevent them from falling and causing injury. 21. After production is completed, the site should be cleaned up in a timely manner to prevent items such as ground straps from tripping and causing injury. When using the elevator, it must be lowered to the bottom and the elevator door must be closed. Safety production is no small matter, it cannot be relaxed for even a moment!
